Removed obsolete stuff

<?xml version="1.0"?>

<!--

    Licensed to the Apache Software Foundation (ASF) under one or more

    contributor license agreements.  See the NOTICE file distributed with

    this work for additional information regarding copyright ownership.

    The ASF licenses this file to You under the Apache License, Version 2.0

    (the "License"); you may not use this file except in compliance with

    the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software

    distributed under the License is distributed on an "AS IS" BASIS,

    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

    See the License for the specific language governing permissions and

    limitations under the License.

-->

<book>

	<id>manual</id>

	<title>Alfresco Extension Manual</title>

	<chapters>

		<chapter>

			<id>introduction</id>

			<title>Introduction</title>

			<sections>

				<section>

					<id>book-index</id>

				</section>

			</sections>

		</chapter>

	</chapters>

</book>

 No newline at end of file

<?xml version='1.0' encoding='UTF-8'?>

<!--

    Licensed to the Apache Software Foundation (ASF) under one or more

    contributor license agreements.  See the NOTICE file distributed with

    this work for additional information regarding copyright ownership.

    The ASF licenses this file to You under the Apache License, Version 2.0

    (the "License"); you may not use this file except in compliance with

    the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software

    distributed under the License is distributed on an "AS IS" BASIS,

    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

    See the License for the specific language governing permissions and

    limitations under the License.

-->

<!DOCTYPE beans PUBLIC '-//SPRING//DTD BEAN//EN' 'http://www.springframework.org/dtd/spring-beans.dtd'>

<beans>

	<bean name="ldapAuthenticationPlaceholderConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">

	    <property name="ignoreUnresolvablePlaceholders">

            <value>true</value>

        </property>  

        <property name="locations">

            <value>classpath:alfresco/extension/application.properties</value>

        </property>

    </bean>

    <!-- DAO that rejects changes - LDAP is read only at the moment. It does allow users to be deleted with out warnings from the UI. -->

    <bean name="authenticationDao" class="org.alfresco.repo.security.authentication.DefaultMutableAuthenticationDao" >

        <property name="allowDeleteUser">

            <value>${ldap.authentication.allowDeleteUser}</value>

        </property>

    </bean>    

    <bean id="ldapInitialDirContextFactory" class="org.alfresco.repo.security.authentication.ldap.LDAPInitialDirContextFactoryImpl">

        <property name="initialDirContextEnvironment">

            <map>

                <!-- The LDAP provider -->

                <entry key="java.naming.factory.initial">

                    <value>${ldap.authentication.provider}</value>

                </entry>

                <!-- The url to the LDAP server -->

                <!-- Note you can use space separated urls - they will be tried in turn until one works -->

                <!-- This could be used to authenticate against one or more ldap servers (you will not know which one ....) -->

                <entry key="java.naming.provider.url">

                   	<value>${ldap.authentication.url}</value>

                </entry>

		<entry key="java.naming.security.protocol">

			<value>${ldap.authentication.protocol}</value>

		</entry>                

                <!-- The authentication mechanism to use      -->

                <!-- Some sasl authentication mechanisms may require a realm to be set -->

                <!--                java.naming.security.sasl.realm -->

                <!-- The available options will depend on your LDAP provider -->

                <!-- The id of a user who can read group and user information -->

                <!-- This does not go through the pattern substitution defined above and is used "as is" -->

                <entry key="java.naming.security.principal">

                    <value>${ldap.authnetication.adminUser}</value>

                </entry>

                <!-- The password for the user defined above -->

                <entry key="java.naming.security.credentials">

                    <value>${ldap.authnetication.adminPassword}</value>

                </entry>

            </map>

        </property>

    </bean>

	<bean id="authenticationComponent" class="org.alfresco.repo.security.authentication.ldap.LDAPAuthenticationComponentImpl">

        <property name="LDAPInitialDirContextFactory">

            <ref bean="ldapInitialDirContextFactory"/>

        </property>

        <property name="userNameFormat">

            <value>cn=%s,ou=Identities,ou=Internal,o=NXP</value>

        </property>

         <property name="allowGuestLogin">

            <value>${ldap.authentication.guestLogin.allowed}</value>

        </property>

    </bean>

    <!-- The person service.                                                -->

    <bean id="personService" class="org.alfresco.repo.security.person.PersonServiceImpl" init-method="init">

        <property name="nodeService">

            <ref bean="nodeService" />

        </property>

        <property name="searchService">

            <ref bean="admSearchService" />

        </property>

        <property name="permissionServiceSPI">

            <ref bean="permissionServiceImpl" />

        </property>

        <property name="authorityService">

            <ref bean="authorityService" />

        </property>

        <property name="namespacePrefixResolver">

            <ref bean="namespaceService" />

        </property>

        <property name="policyComponent">

            <ref bean="policyComponent"/>

        </property>

        <property name="personCache">

            <ref bean="personCache" />

        </property>

        <!-- Configurable properties.                                 -->

        <!--                                                          -->

        <!-- TODO:                                                    -->

        <!-- Add support for creating real home spaces adn setting    -->

        <!-- permissions on the hame space and people created.        -->

        <!--                                                          -->

        <!-- The store in which people are persisted.                 -->

        <property name="storeUrl">

            <value>${spaces.store}</value>

        </property>

        <!-- Some authentication mechanisms may need to create people -->

        <!-- in the repository on demand. This enables that feature.  -->

        <!-- If dsiabled an error will be generated for missing       -->

        <!-- people. If enabled then a person will be created and     -->

        <!-- persisted.                                               -->

        <!-- Valid values are                                         -->

        <!--     ${server.transaction.allow-writes}                   -->

        <!--     false                                                -->

        <property name="createMissingPeople">

            <value>${server.transaction.allow-writes}</value>

        </property>

        <property name="userNamesAreCaseSensitive">

            <value>${user.name.caseSensitive}</value>

        </property>

        <!-- New properties after 1.4.0 to deal with duplicate user ids when found -->

        <property name="processDuplicates">

            <value>${personService.processDuplicates}</value>

        </property>

        <!-- one of:  LEAVE, SPLIT, DELETE -->

        <property name="duplicateMode">

            <value>${personService.duplicateMode}</value>

        </property>

        <property name="lastIsBest">

            <value>${personService.lastIsBest}</value>

        </property>

        <property name="includeAutoCreated">

            <value>${personService.includeAutoCreated}</value>

        </property>

    </bean>

</beans>

<?xml version='1.0' encoding='UTF-8'?>

<!--

    Licensed to the Apache Software Foundation (ASF) under one or more

    contributor license agreements.  See the NOTICE file distributed with

    this work for additional information regarding copyright ownership.

    The ASF licenses this file to You under the Apache License, Version 2.0

    (the "License"); you may not use this file except in compliance with

    the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software

    distributed under the License is distributed on an "AS IS" BASIS,

    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

    See the License for the specific language governing permissions and

    limitations under the License.

-->

<!DOCTYPE beans PUBLIC '-//SPRING//DTD BEAN//EN' 'http://www.springframework.org/dtd/spring-beans.dtd'>

<beans>

	<bean name="ldapSynchronisationPlaceholderConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">

	    <property name="ignoreUnresolvablePlaceholders">

            <value>true</value>

        </property>  

        <property name="locations">

            <value>classpath:alfresco/extension/application.properties</value>

        </property>

    </bean>

    <!-- 

		Wire up the same context as used for LDAP authentication. You could use another context: just replace this

		 alias with the bean definition 

    -->

    <alias alias="ldapSyncInitialDirContextFactory" name="ldapInitialDirContextFactory"/>

    <!-- Ldap Syncronisation support -->

    <!-- 

    There can be more than one stack of beans that import users or groups. For example, it may be easier

    to have a version of ldapPeopleExportSource, and associated beans, for each sub-tree of your ldap directory

    from which you want to import users. You could then limit users to be imported from two or more sub tress and ignore 

    users found else where. The same applies to the import of groups. 

    The defaults shown below are for OpenLDAP.    

    -->

    <!-- Extract user information from LDAP and transform this to XML -->

    <bean id="ldapPeopleExportSource" class="org.alfresco.repo.security.authentication.ldap.LDAPPersonExportSource">

        <!-- 

        The query to select objects that represent the users to import.

        For Open LDAP, using a basic schema, the following is probably what you want:

        (objectclass=inetOrgPerson)

        For Active Directory:

        (objectclass=user)

        -->

        <property name="personQuery">

            <value>${ldap.synchronisation.personQuery}</value>

        </property>

        <!--

        The seach base restricts the LDAP query to a sub section of tree on the LDAP server.

        -->

        <property name="searchBase">

            <value>${ldap.synchronisation.personSearchBase}</value>

        </property>

        <!--

        The unique identifier for the user.

        THIS MUST MATCH WHAT THE USER TYPES IN AT THE LOGIN PROMPT    

        For simple LDAP authentication this is likely to be "cn" or, less friendly, "distinguishedName"

        In OpenLDAP, using other authentication mechanisms "uid", but this depends on how you map

        from the id in the LDAP authentication request to search for the inetOrgPerson against which

        to authenticate.

        In Active Directory this is most likely to be "sAMAccountName" 

        This property is mandatory and must appear on all users found by the query defined above.

        -->

        <property name="userIdAttributeName">

            <value>${ldap.synchronisation.userIdAttributeName}</value>

        </property>

        <!-- Services -->

        <property name="LDAPInitialDirContextFactory">

            <ref bean="ldapSyncInitialDirContextFactory"/>

        </property>

        <property name="personService">

            <ref bean="personService"></ref>

        </property>

        <property name="namespaceService">

            <ref bean="namespaceService"/>

        </property>

        <!--

        This property defines a mapping between attributes held on LDAP user objects and

        the properties of user objects held in the repository. The key is the QName of an attribute in

        the repository, the value is the attribute name from the user/inetOrgPerson/.. object in the

        LDAP repository.     

        -->

        <property name="attributeMapping">

            <map>

                <entry key="cm:userName">

                    <!-- Must match the same attribute as userIdAttributeName -->

                    <value>${ldap.synchronisation.userIdAttributeName}</value>

                </entry>

                <entry key="cm:firstName">

                    <!-- OpenLDAP: "givenName" -->

                    <!-- Active Directory: "givenName" -->

                    <value>${ldap.synchronisation.userFirstNameAttributeName}</value>

                </entry>

                <entry key="cm:lastName">

                    <!-- OpenLDAP: "sn" -->

                    <!-- Active Directory: "sn" -->

                    <value>${ldap.synchronisation.userLastNameAttributeName}</value>

                </entry>

                <entry key="cm:email">

                    <!-- OpenLDAP: "mail" -->

                    <!-- Active Directory: "???" -->

                    <value>${ldap.synchronisation.userEmailAttributeName}</value>

                </entry>

                <entry key="cm:organizationId">

                    <!-- OpenLDAP: "o" -->

                    <!-- Active Directory: "???" -->

                    <value>${ldap.synchronisation.userOrganizationalIdAttributeName}</value>

                </entry>

                <!-- Always use the default -->

                <entry key="cm:homeFolderProvider">

                    <null/>

                </entry>

            </map>

        </property>

        <!-- Set a default home folder provider -->

        <!-- Defaults only apply for values above -->

        <property name="attributeDefaults">

            <map>

                <entry key="cm:homeFolderProvider">

                    <value>${ldap.synchronisation.defaultHomeFolderProvider}</value>

                </entry>

            </map>

        </property>

    </bean>

    <!-- Extract group information from LDAP and transform this to XML -->

    <bean id="ldapGroupExportSource" class="org.alfresco.repo.security.authentication.ldap.LDAPGroupExportSource">

        <!--

        The query to select objects that represent the groups to import.

        For Open LDAP, using a basic schema, the following is probably what you want:

        (objectclass=groupOfNames)

        For Active Directory:

        (objectclass=group)

        -->

        <property name="groupQuery">

            <value>${ldap.synchronisation.groupQuery}</value>

        </property>

        <!--

        The seach base restricts the LDAP query to a sub section of tree on the LDAP server.

        -->

        <property name="searchBase">

            <value>${ldap.synchronisation.groupSearchBase}</value>

        </property>

        <!--

        The unique identifier for the user. This must match the userIdAttributeName on the ldapPeopleExportSource bean above.

        -->

        <property name="userIdAttributeName">

            <value>${ldap.synchronisation.userIdAttributeName}</value>

        </property>

        <!--

        An attribute that is a unique identifier for each group found. 

        This is also the name of the group with the current group implementation.

        This is mandatory for any groups found.

        OpenLDAP: "cn" as it is mandatory on groupOfNames

        Active Directory: "cn"

        -->

        <property name="groupIdAttributeName">

            <value>${ldap.synchronisation.groupIdAttributeName}</value>

        </property>

        <!-- 

        The objectClass attribute for group members.

        For each member of a group, the distinguished name is given.

        The object is looked up by its DN. If the object is of this class it is treated as a group. 

        -->

        <property name="groupType">

            <value>${ldap.synchronisation.groupType}</value>

        </property>

        <!-- 

        The objectClass attribute for person members.

        For each member of a group, the distinguished name is given.

        The object is looked up by its DN. If the object is of this class it is treated as a person. 

        -->

        <property name="personType">

            <value>${ldap.synchronisation.personType}</value>

        </property>

        <property name="LDAPInitialDirContextFactory">

            <ref bean="ldapSyncInitialDirContextFactory"/>

        </property>

        <property name="namespaceService">

            <ref bean="namespaceService"/>

        </property>

        <!--

        The repeating attribute on group objects (found by query or as sub groups)

        used to define membership of the group. This is assumed to hold distinguished names of

        other groups or users/people; the above types are used to determine this.

        OpenLDAP: "member" as it is mandatory on groupOfNames

        Active Directory: "member"

        -->

        <property name="memberAttribute">

            <value>${ldap.synchronisation.groupMemberAttributeName}</value>

        </property>

        <property name="authorityDAO">

            <ref bean="authorityDAO"/>

        </property>

    </bean>

    <!-- Job definitions to import LDAP people and groups -->

    <!-- The triggers register themselves with the scheduler -->

    <!-- You may comment in the default scheduler to enable these triggers -->

    <!-- If a cron base trigger is what you want seee scheduled-jobs-context.xml for examples. -->

    <!-- Trigger to load poeple -->

    <!-- Note you can have more than one initial (context, trigger, import job and export source) set -->

    <!-- This would allow you to load people from more than one ldap store -->

    <bean id="ldapPeopleTrigger" class="org.alfresco.util.CronTriggerBean">

        <property name="jobDetail">

            <bean id="ldapPeopleJobDetail" class="org.springframework.scheduling.quartz.JobDetailBean">

                <property name="jobClass">

                    <value>org.alfresco.repo.importer.ImporterJob</value>

                </property>

                <property name="jobDataAsMap">

                    <map>

                        <entry key="bean">

                            <ref bean="ldapPeopleImport"/>

                        </entry>

                    </map>

                </property>

            </bean>

        </property>

        <property name="cronExpression">

			<value>${ldap.synchronisation.import.person.cron}</value>

		</property>

        <property name="scheduler">

            <ref bean="schedulerFactory" />

        </property>

    </bean>

    <bean id="ldapGroupTrigger" class="org.alfresco.util.CronTriggerBean">

        <property name="jobDetail">

            <bean id="ldapGroupJobDetail" class="org.springframework.scheduling.quartz.JobDetailBean">

                <property name="jobClass">

                    <value>org.alfresco.repo.importer.ImporterJob</value>

                </property>

                <property name="jobDataAsMap">

                    <map>

                        <entry key="bean">

                            <ref bean="ldapGroupImport"/>

                        </entry>

                    </map>

                </property>

            </bean>

        </property>

        <property name="cronExpression">

			<value>${ldap.synchronisation.import.group.cron}</value>

		</property>

        <property name="scheduler">

            <ref bean="schedulerFactory" />

        </property>

    </bean>

    <!-- The bean that imports xml describing people -->

    <bean id="ldapPeopleImport" class="org.alfresco.repo.importer.ExportSourceImporter">

        <property name="importerService">

            <ref bean="importerComponentWithBehaviour"/>

        </property>

        <property name="transactionService">

            <ref bean="transactionComponent"/>

        </property>

        <property name="authenticationComponent">

            <ref bean="authenticationComponent"/>

        </property>

        <property name="exportSource">

            <ref bean="ldapPeopleExportSource"/>

        </property>

        <!-- The store that contains people - this should not be changed -->

        <property name="storeRef">

            <value>${spaces.store}</value>

        </property>

        <!-- The location of people nodes within the store defined above - this should not be changed -->

        <property name="path">

            <value>/${system.system_container.childname}/${system.people_container.childname}</value>

        </property>

        <!-- If true, clear all existing people before import, if false update/add people from the xml -->

        <property name="clearAllChildren">

            <value>false</value>

        </property>

        <property name="nodeService">

            <ref bean="nodeService"/>

        </property>

        <property name="searchService">

            <ref bean="searchService"/>

        </property>

        <property name="namespacePrefixResolver">

            <ref bean="namespaceService"/>

        </property>

        <property name="caches">

            <set>

                <ref bean="permissionsAccessCache"/>

            </set>

        </property>

    </bean>

    <!-- The bean that imports xml descibing groups -->

    <bean id="ldapGroupImport" class="org.alfresco.repo.importer.ExportSourceImporter">

        <property name="importerService">

            <ref bean="importerComponentWithBehaviour"/>

        </property>

        <property name="transactionService">

            <ref bean="transactionComponent"/>

        </property>

        <property name="authenticationComponent">

            <ref bean="authenticationComponent"/>

        </property>

        <property name="exportSource">

            <ref bean="ldapGroupExportSource"/>

        </property>

        <!-- The store that contains group information - this should not be changed -->

        <property name="storeRef">

            <value>${alfresco_user_store.store}</value>

        </property>

        <!-- The location of group information in the store above - this should not be changed -->

        <property name="path">

            <value>/${alfresco_user_store.system_container.childname}/${alfresco_user_store.authorities_container.childname}</value>

        </property>

        <!-- If true, clear all existing groups before import, if false update/add groups from the xml -->

        <property name="clearAllChildren">

            <value>${ldap.synchronisation.import.group.clearAllChildren}</value>

        </property>

        <property name="nodeService">

            <ref bean="nodeService"/>

        </property>

        <property name="searchService">

            <ref bean="searchService"/>

        </property>

        <property name="namespacePrefixResolver">

            <ref bean="namespaceService"/>

        </property>

        <!-- caches to clear on import of groups -->

        <property name="caches">

            <set>

                <ref bean="userToAuthorityCache"/>

                <ref bean="permissionsAccessCache"/>

            </set>

        </property>

        <!-- userToAuthorityCache -->

    </bean>

</beans>